Home Automation OmniPro II Show Message, Log Message, Clear Message, Say Message, Phone Message

Show Message

The 1 (SHOW) key allows you to display the selected text message(s) on the console's top-level display. This can be a helpful reminder of special events and occasions.

TRASH	NIGHT	↓
ENTER	MESSAGE

You may enter the message number followed by the ' # ' key to display that message, or simply press the down arrow key to scroll through a list of messages. Press the ' # ' key to display the selected message:

Thu Oct 04,	01 4:06 PM
TRASH NIGHT

When the message is displayed, the console will beep 4 times and the console LED will flash continuously. You may press the

'* ' key to acknowledge seeing the message. This will cause the LED to stop flashing, however, the message will remain on the display until it is manually cleared, or cleared by a program.

Log Message

The 2 (LOG) key allows you to store the selected text message(s) in the Event Log. This can be a helpful to keep track of the times and dates of events and occurrences.

You may enter the message number followed by the ' # ' key to log that message, or simply press the down arrow key to scroll through a list of messages. Press the ' # ' key to log the selected message.

Clear Message

The 3 (CLEAR) key allows you to clear the selected text message, or all text messages from the console's display.

TRASH	NIGHT	0=ALL ↓
ENTER	MESSAGE

You may enter the message number followed by the ' # ' key to clear that message, or simply press the down arrow key to scroll through a list of messages. Press the ' # ' key to clear the selected message, or press 0, then ' # ' to clear all messages.

Say Message

Note: To Say a message, the HAI Two-Way Audio Module (with a speaker) must be installed.

The 4 (SAY) key allows the controller to say the selected voice message over a speaker. This voice message can be an audible reminder of special events and occasions.

You may enter the message number followed by the ' # ' key to say that message, or simply press the down arrow key to scroll through a list of messages. Press the ' # ' key to say the selected message.

Phone Message

The 5 (PHONE) key allows the controller to call the selected phone number and say the selected voice message.

PHONE NUMBER: 1-8

Select a phone number (1-8) from the dial menu, then press ' # ':

SECURITY OFF	↓
ENTER MESSAGE

You may enter the message number followed by the ' # ' key, or simply press the down arrow key to scroll through a list of messages. Press the ' # ' key to dial the number and say the selected voice message.

Page 42