Silencer Guard Assembly

1.Remove silencer guard and two screws from the owner’s kit.

2.Attach the silencer guard to the rear housing.

NOTE: Make sure the bent end of the silencer guard fits securely into the opening of the rear housing.

3.Install two screws.

4.Tighten screws securely.

GRASS DEFLECTOR AND BLADE

NOTE: When converting from brushcutter to trimmer, or trimmer to brushcutter, make sure the correct guard/ deflector is being used.

REAR HOUSING

SILENCER

GUARD

SCREWS

BENT END OF SILENCER

GUARD

OPENING IN REAR

HOUSING

Fig. 4

GRASS DEFLECTOR FOR

STRING TRIMMER USE

BLADE GUARD FOR

BRUSHCUTTER USE

Fig. 5

Image 8

Contents

OPERATOR’S Manual Save this Manual for Future Reference Table of Contents Safety Specific Safety Rules for Trimmer USE Specific Safety Rules for Brushcutter and Blade USE Symbols Symbol Name Explanation Technical Data Features UnpackingInstructions Packing List for OWNER’S KIT Attaching the Shoulder Strap AssemblyFront Handle Silencer Guard Assembly Grass Deflector and Blade Guard USE Converting from Trimmer to Brushcutter Blade GuardGrass Deflector Installing the Blade Installing the String HeadConverting from Brushcutter to Trimmer Removing the Blade Operating the Trimmer OperationFuel and Refuelling Grass Deflector Line Trimming CUT-OFF Blade Advancing the StringCutting Tips Cutting Technique Blade Operating the BrushcutterTRI-ARC Blade Ignition Switch Starting and StoppingTo Start a Cold Engine To Start a Warm Engine Maintenance Spool Replacement EZ Line TAP Advance SystemNEW PRE-WOUND Spool See Figures 16 Blade Protector Cleaning the Exhaust Port and Silencer Replacing and Cleaning AIR FilterSpark Arrester Latch Pull Cover To Open Filter Sparking Plug Fuel CAPStorage 1 Month or Longer Troubleshooting Dealer. See Figure Idle Speed Screw Needle Warranty Safety DirectiveGuarantee Statement Rtsa / Rtuk / RTG Sound Pressure Sound Power Vibration Model Model no Ryobi Technologies GmbH