Nozzle
(35 Model)
1. | Remove upper shell (see page 12). |
2. | Remove fan (see page 12). |
3. | Remove fuel and air line hoses |
| from nozzle assembly. |
4. | Turn nozzle assembly 1/4 turn to |
Combustion
Chamber
Nozzle
Nozzle
Assembly
Burner
Strap
| left and pull toward motor to |
| remove. |
5. | Place plastic |
| and lightly tighten. |
6. | Carefully remove nozzle from the |
| nozzle adapter using 5/8" socket |
| wrench. |
7. | Blow compressed air through face |
| of nozzle. This will free any dirt in |
| nozzle area. |
8. | Inspect nozzle seal for damage. |
9. | Replace nozzle into nozzle adapter |
| until nozzle seats. Tighten 1/3 turn |
| more using 5/8" socket wrench (40- |
| 45 |
10. Attach nozzle assembly to burner | |
| strap. |
11. Attach fuel and airline hoses to | |
| nozzle assembly. |
12. Replace fan (see page 12). | |
13. Replace fan guard and upper shell. | |
Nozzle
(100/150 Models)
1.Remove upper shell (see page 12).
2.Remove fan (see page 12).
3.Remove fuel and air line hoses from burner head.
4.Remove spark plug cable from spark plug.
5.Remove spark plug from burner head using 13/16"
6.Remove three (3) screws using 5/16"
7.Place burner head into vise and lightly tighten.
8.Carefully remove nozzle from burn- er head by using 5/8" socket wrench (see Figure 26).
9.Blow compressed air through face of nozzle. This will free any dirt in nozzle area.
10.Inspect nozzle seal for damage.
11.Replace nozzle into burner head and tighten firmly
Continued
Assembly
Fuel Line Hose |
|
Air Line Hose |
|
Figure 22 - Removing Air and Fuel | Figure 23 - Removing Nozzle Assem- |
Line Hoses, 35 Model | bly, 35 Model |
Nozzle |
| Nozzle |
Face |
| |
| Seal | |
|
| |
Nozzle |
|
|
| Nozzle |
|
| Adapter |
|
| Air Line | Fuel Line |
| Fitting | |
| Fitting | |
|
|
Figure 24 - Nozzle and Nozzle Adapter, 35 Model
Spark Plug
CombustionBurner HeadCable
Chamber
Screw
Spark
Plug
Air Line Hose 
Fuel Line Hose
Figure 25 - Removing Burner Head, 100/150 Models
15
100577
