6. OPERATION (POWER TRIM/TILT TYPE)
LEVER

Tilt Lock Lever

Use the tilt lock lever when the boat is
moored.
1. Tilt the motor up as far as it will go
using the power trim/tilt switch.
2. Move the tilt lock lever to the
LOCK position and lower the out-
board motor until the lock lever
contacts the stem bracket (refer to
page 23).
It may be necessary to lift the engine
cover grip slightly to swing the tilt lock
lever into the LOCK position.
3. To lower the motor, tilt the motor
up slightly, move the tilt lock lever
to the FREE position, and lower the
motor to the desired position.
, *
61