10. MAINTENANCE
8. Engage the emergency stop
switch clip with the emergency
stop switch and attempt to start
the engine (be sure the water
level is at least 2 inches above the
anti-ventilation plate).
l If the engine fails to start, re-
move the spark plugs, clean
and dry the electrodes, then re-
install the spark plugs and at-
tempt to start the engine again.
l If the engine starts, and no me-
chanical damage is evident,
continue run the engine for a l/2
hour or longer.
l If there was water in the en-
gine crankcase, or the used en-
gine oil showed signs of water
contamination, then a second
engine oil change should be
performed after running the en-
gine for a l/2 hour.
9. Take the outboard motor to your
closest authorized Honda Marine
dealer for inspection and service
as soon as possible.
93