17
CONTROLS & FEATURES
Abnormal Voltage Detection Function
Overspeed Detection Function
Oil Alert Function
Automatic Engine Stop Function
FEATURES
Oil Alert System
The engine will automatically stop during generation when it detects
abnormal voltage.
To protect the engine from exceeding the engine load, the engine will
automatically stop if the engine speed becomes abnormal.
During operation, the engine will automatically stop if there is not
enough oil in the tank. Moreover, if the generator is on a slope, the oil
alert function may operate and stop the engine.
If the engine stops and will not restart, check the engine oil level (see
page ) before troubleshooting in other areas.
The Oil Alert system is designed to prevent engine damage caused by
an insufficient amount of oil in the crankcase. Before the oil level in the
crankcase can fall below a safe limit, the Oil Alert system will
automatically stop the engine (the engine switch will remain in the ON
position).
If the engine stops, make sure the oil level is correct. Wait a few
minutes, and then try to restart the engine. If the engine still won’t
start, take the generator to your authorized servicing Honda power
equipment dealer.
38
10/08/27 13:26:32 31Z30600_018