51
STORAGE
Engine Oil
FUEL VALVE LEVER
OONN
Align the notch on the starter pulley
withthe hole at the top of recoil starter.
After all the gasoline has drained into the container, tighten the
drain bolt securely.
Place a suitable gasoline container below the sediment cup, and use
a funnel to avoid spilling gasoline.
Remove the sediment cup (see page ), and then turn the fuel
valve lever to the ON position.
Allow the gasoline to drain completely, and then install the sediment
cup (see page ).
Slowly pull the starter grip until resistance is felt. At this point, the
piston is coming up on its compression stroke, and both the intake
and exhaust valves are closed. Storing the engine in this position
will help to protect it from internal corrosion.
Change the engine oil (see page 39).
Remove the spark plug, and pour between one and two teaspoons
(5 cc) of clean engine oil into the cylinder. Crank the engine several
revolutions to distribute the oil, then reinstall the spark plug.
2.
1.
3.
3.
4.
5.
6.
47
47
10/08/27 13:31:55 31Z30600_052