39
SERVICING YOUR GENERATOR
ENGINE OIL CHANGE
UPPER LIMIT
SEALING
WASHER
OILFILLER CAP/DIPSTICK
12 15 mm
OIL DRAIN PLUG
Drain the oil while the engine is warm to assure rapid and complete
draining.
With the generator in a level position, fill with the recommended oil
to the outer edge of the oil filler hole (see page ).
Screw in the oil filler cap/dipstick securely.
Wash your hands with soap and water after handling used oil.
Improper disposal of engine oil can be harmful to the environment. Ifyou change your own oil, please dispose of it properly. Put it in asealed container, and take it to a recycling center. Do not discard it in atrash bin, dump it on the ground, or pour it down a drain.
Place a suitable container below the engine to catch the used oil,
and then remove the oil filler cap/dipstick, 12 15 mm drain plug,
and sealing washer.
Allow the used oil to drain completely, and then reinstall the 12 15
mm drain plug and a new sealing washer. Tighten the plug securely.
1.
2.
3.
4.
38
10/08/27 13:30:10 31Z30600_040