33
SERVICING YOUR TILLER
TRANSMISSION OIL LEVEL CHECK
TRANSMISSIONOIL
LEVEL CHECK BOLT
OILFILLER HOLE
LEVEL
WASHER
TRANSMISSIONOIL
FILLER CAP
Check the transmission oil level with the tiller on a level surface and
the engine stopped.
Remove the transmission oil level check bolt. The oil should be level
with the lower edge of the oil filler hole.
Reinstall the oil filler cap and tighten the oil level check bolt securely.
If the oil level is low, remove the transmission oil filler cap and add
the same type of oil recommended for the engine (see page ).
1.
2.
3.
32
07/12/21 13:27:41 31V20610_034