42
SERVICING YOUR TILLER
SPARK ARRESTER SERVICE (applicable types)
MUFFLER PROTECTOR
4mm SCREWS
5mm SCREWS
MUFFLER
MOUNTINGBOLT
SPECIALSCREW
8mm NUTS
MUFFLER DEFLECTOR
SPARKARRESTER
5mm SCREWS
Your engine is not factory-equipped with a spark arrester. In some
areas, it is illegal to operate an engine without a spark arrester. Check
local laws and regulations. A spark arrester is available from
authorized Honda servicing dealers.
If the engine has been running, the muffler will be very hot. Allow the
muffler to cool before servicing the spark arrester.
The spark arrester must be serviced every 6 months or 100 hours to
keep it functioning as designed.
Remove the mounting bolt.
Remove the two 8 mm nuts, and remove the muffler from the
cylinder.
Remove the special screw from the spark arrester, and removethe
spark arrester from the muffler.
Remove the six 5 mm screws from the muffler protector, and
remove the muffler protector.
Remove the two 4 mm screws from the muffler deflector, and
remove the muffler deflector.
1.
2.
3.
4.
5.
07/12/21 13:28:56 31V20610_043