34
SERVICING YOUR TILLER
AIR FILTER INSPECTION
AIR FILTER CLEANING
AIR CLEANER COVER WING NUT
WINGNUT
PAPER
ELEMENT
FOAM
ELEMENT
Carefully check both filter elements for holes or tears and replace if
necessary.
Remove the wing nut and air cleaner cover.
A dirty air filter will restrict air flow to the carburetor, reducing engine
performance. If you operate the tiller in very dusty areas, clean the air
filter more frequently than specified in the
Maintenance Schedule
.
Operating the engine without an air filter, or with a damaged air filter,will allow dirt to enter the engine, causing rapid engine wear. This typeof damage is not covered by the
Distributor’s Limited Warranty.
Unscrew the wing nut, and
remove the air cleaner cover.
Check the air filter elements to be
sure they are clean and in good
condition.
Reinstall the air cleaner cover,
and tighten the wing nut securely.
If the air filter elements are dirty,
clean them as described on page
. Replace the air filter elements
if they are damaged.
Remove the wing nut and grommet, remove the air filter elements
and separate them.
1.
2.
3.
1.
2.
3.
35
07/12/21 13:27:50 31V20610_035