Honda Power Equipment FRC800 - page 39

37
SERVICING YOUR TILLER
CLUTCH CABLE ADJUSTMENT
LOCKNUT
ADJUSTINGNUT
3/16 3/8 in(5 10 mm)
If reinstalling a used spark plug, tighten 1/8 1/4 turn after the
spark plug seats.
If installing a new spark plug, tighten 1/2 turn after the spark plug
seats.
Adjust the handlebar height to the third hole from the bottom (see
page ).
Attach the spark plug cap.
A loose spark plug can overheat and damage the engine.
Overtightening the spark plug can damage the threads in the
cylinder head.
There should be 3/16 3/8 inches (5 10 mm) of free play at the
lever end. If lever adjustment is incorrect, loosen the lock nut and turn
the adjusting nut in or out just enough to eliminate free play. Do not
overtighten.
7.
19
07/12/21 13:28:15 31V20610_038