BEFORE OPERATION
IS YOUR PUMP READY TO GO? For your safety, and to maximize the service life of your equipment, it
is very important to take a few moments before you operate the pump
to check its condition. Be sure to take care of any problem you find,
or have your servicing dealer correct it, before you operate the pump.
Improperly maintaining this pump, or failing
to correct a problem before operation, could
cause a malfunction in which you could be
seriously injured.
Always perform a preoperation inspection
before each operation, and correct any
problem. 1
Exhaust gas contains poisonous carbon monoxide. Avoid inhalation
of exhaust gas. Never run the engine in a closed garage or confined
area.
To prevent fire hazards, keep the pump at least 3 feet (1 meter) away
from building walls and other equipment during operation. Do not
place flammable objects close to the engine.
Before beginning your preoperation checks, be sure the pump is on a
level surface and the ignition switch is in the OFF position.
Check the General Condition of the Pump
l Look around and underneath the pump for signs of oil or gasoline
leaks.
l Remove any excessive dirt or debris, especially around the engine,
muffler, and recoil starter.
l Look for signs of damage.
l Check that all nuts, bolts, screws, hose connectors and clamps are
tightened.
l Keep all shields in place while operating the pump.
15