MAINTENANCE
Fuel Filter/Fuel Line
1.
2.
3.
4.
5.
6.
7.
Turn the fuel valve to the OFF
position.
Remove the carburetor drain
screw and gasket.
Turn the fuel valve to the ON
position and drain the fuel into a
suitable container. Disconnect
the fuel line at the carburetor.
Remove the two 6 mm nuts
and one 6 x 25 mm bolt
securing the fuel tank. Remove
the fuel tank.
Disconnect the fuel line, and
unscrew the fuel filter from the
tank. Inspect the fuel line and
replace if cracked or worn.
Clean the filter with
nonflammable solvent, and
check that the filter screen is
not damaged. Replace as
necessary.
Clean the inside of the tank
with nonflammable solvent and
dry thoroughly.
Place the O-ring on the filter
and install the filter in the tank.
Tighten the filter to the
specified torque.
Torque: 17 in-lb
(20
kg-cm, 2 Nsm)
8. Install the fuel line on the fuel
filter,
and install the tank on the
engine.
9. After the tank is installed, add
fuel and check for leaks.
42
FUEL VALVE
DRAIN-SCREW
O-RING
FUEL FILTER
a
FUEL LINE