![](/images/backgrounds/160531/160531-9222x1.png)
6.Pull smoothly and evenly from left to right until the screen protector is applied. Press gently but firmly. Use the card as necessary to smooth out any air pockets or bumps after application.
7.Press the Power key to wake the terminal and check the touch panel with the stylus.
8.Verify that the screen accepts input from the stylus as usual. If not,
9.Press the Power key to put the terminal back in Suspend Mode.
10.Clean the surface of the screen protector with a clean,
11.Press the Power key to wake the terminal again.
3 - 6