3.Slide the washer onto the screw and tighten the nut to secure the assembly.
Wall Bracket, Qty. 1 | Screw, Qty. 2 |
|
Washer, Qty. 1 | DIN Rail, Qty. 1 |
| |
Nut, Qty. 1 |
|
Washer, Qty. 1
Nut, Qty. 1
4.Remove the rubber feet on the bottom of the ChargeBase.
5.Slide the base onto the DIN Rail using the slot on the bottom of the base.
Wall Bracket
DIN Rail
10 - 7