Charging the Main Battery

The base powers the terminal and fully charges its main battery pack in 4 or 6 hours depending on the battery.

As battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is recommended for Li-Ion batteries. The process monitors changes in temperature, current, and voltage.

Inserting a Terminal

1. Install the battery pack in the terminal; see Install the Main Battery on page 2-1.

2. Power the base; see Powering the Dolphin HomeBase Device on page 9-3.

3. Slide the terminal into the terminal well making certain that the terminal is seated properly.

4. The battery pack begins charging.

!Ensure all components are dry prior to mating terminals/

batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty.

9 - 5