Mounting the ChargeBase

Set the ChargeBase on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal while it is in the ChargeBase. When choosing a location, bear in mind that the mounting location must allow users easy access to the terminal wells and the power jack.

Bottom Panel

Rubber Feet, Qty. 6

DIN Rail Slot

Serial Number and Compliance

Label

Desk Mounting

The DIN Rail (7.5 X 35 mm) slot on the bottom panel enables secure mounting on a horizontal surface.

Hardware Required

•3/16 in. dia x 5/8 in. long pan head screw

•1/2 in. OD x 7/32 in. ID x 3/64 in. thick washer

•3/16 in. dia nut

Installing the DIN Rail

1.Slide the DIN Rail into the DIN Rail slot on the bottom panel of the base.

2.Turn the base and DIN Rail right side up.

10 - 4