Honeywell 7600 Default Settings

Default Settings

Many functions of the scanner can be "programmed" - that is, enabled or disabled. The scanner is shipped from the factory programmed to a set of default conditions. The default parameter of the scanner has an asterisk ( * ) in the charts on the following pages. If an asterisk is not in the default column then the default setting is Off or Disabled. Every communication does not support every parameter. If the communication supports a parameter listed in the charts on the following pages, a check mark will appear.

PARAMETER	DEFAULT	OCIA	RS-232	LIGHT	RS485	KBW	USB
				PEN
UPC/EAN	*						
Code 128	*						
Code 93	*						
Codabar	*						
Interleaved 2 of 5 (ITF)	*						
MOD 10 Check on ITF							
Code 11							
Code 39	*						
Full ASCII Code 39							
MOD 43 Check on							
Code 39
MSI-Plessey							
Airline (15 digit) 2 of 5							
Airline (13 digit) 2 of 5							
Matrix 2 of 5							
Telepen							
UK Plessey							
STD 2 of 5							
MSI-Plessey 10/10 Check							
Digit
MSI-Plessey MOD 10 Check	*						
Digit
Paraf Support							
ITF Symbol Lengths	Variable						
Minimum Symbol Length	4						
Symbol Length Lock	None						
Bars High as Code 39	*			
Spaces High as Code 39				

40