Honeywell 7600 Aux, Default settings for “Aux” interface

Default settings for “Aux” interface

The secondary scanner and the 7600 always communicate via RS232. Data is relayed to the host via various primary interfaces.

PARAMETER	DEFAULT	OCIA	RS-232	LIGHT	RS485	KBW	USB
				PEN
Aux Baud Rate	38400						
Aux parity	space						
Aux data bits	7						
Aux stop bits	2						
Aux character RTS	*						
Aux message RTS							
Aux Ack/Nak	*						
Aux Xon/Xoff	*						
Aux D/E commands							
Aux M/O commands							
Aux F/L commands							
Aux Intercharacter Delay	1 msec						
Aux Port Data Format	None						
	(Disabled)

45