Honeywell 7850 My ISP, My Work Network, disabled, Task Tab, Connections Manager, These links enable you to establish the following connections types:

Connections Manager

The connections manager sets up various network connections to Internet Service Providers (ISPs) via an external modem.

If you are using one of the on-board wireless radios to connect to a network, do not enter network parameters in the connections manager. The Dolphin terminal uses the radio’s settings to connect to the network.

Note: All server-assigned IP addresses use Dynamic Host Configuration Protocol (DHCP). The zero-config WLAN feature of Windows Mobile is disabled on Dolphin terminals.

To open the connections manager, tap Start > Settings > Connections tab > Connections icon . The connection manager opens displaying the Tasks tab.

Task Tab

The Task tab enables you to initially configure, then manage network settings when using a modem. Select an item in this list and then complete the setup screens that follow with the appropriate information for your network.

My ISP

The links under this heading enables you to add and manage modem connections to an ISP. To complete the setup screens, obtain the following information from your ISP:

•ISP dial-up access telephone number

•Username

•Password

•TCP/IP settings

My Work Network

These links enable you to establish the following connections types:

•Modem

•Virtual Private Network (VPN)

•Proxy server connection

To complete the setup screens, obtain the network parameters from your system administrator.

7 - 10