Mounting

Set the base on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure to provide enough workspace with good lighting for the user to view and operate the terminal while it is seated in the base.

Location RecommendationsWhen choosing a location, bear in mind that:

•the mounting location must allow users easy access to the auxiliary battery well, and

•the serial and USB ports as well as the power jack face straight out of the rear panel, and you will most likely want easy access to them in the future.

Installation Hardware
Screw:

3/16 in. dia x 5/8 in. long pan head screw

Washer:

1/2 in. OD x 7/32 in. ID x 3/64 in. thick

Nut:

3/16 in. dia

Desk Mounting

Charging/communication cradles have a DIN rail (7.5 mm high X 35 mm wide) slot on the bottom to allow for secure desk attachment of the unit if desired.

1.Slide the DIN rail slot along the bottom panel.

2.Using the appropriate nuts and bolts, secure the DIN rail to the desk or flat surface.

Note: Use screws that are appropriate for the type of surface (wood or metal, for instance) you are mounting to.

9 - 10