Honeywell 7850 Agency Information, R&TTE, Parameter, Specification, Label Locations, Dolphin 7850 802.11b/g (WLAN) & Bluetooth

1

Agency InformationLabel Locations

Dolphin 7850 mobile computers meet or exceed the requirements of all applicable standards organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe operation is to operate them according to the agency guidelines that follow. Please read these guidelines carefully before using your Dolphin mobile computer.

Compliance Label

Laser Safety Label

Dolphin 7850 802.11b/g (WLAN) & Bluetooth

Dolphin 7850 RF terminals are designed to comply with the most current applicable standards on safe levels of RF energy developed by the Institute of Electrical and Electronics Engineers (IEEE) and the American National Standards Institute (ANSI) and has been recommended for adoption by the Federal Communications Commission (FCC).

R&TTE Compliance Statement—802.11b/g (WLAN) and/or Bluetooth

Dolphin RF terminals are in conformity with all essential requirements of the R&TTE Directive (1999/5/ EC). This equipment has been assessed to the following standards as applicable:

Parameter	Specification
	EN 300 328-2:2000
	EN 301 489-1 (2002-08)
R&TTE	EN 301 489-17 (2002-08)
	EN 60950:2000
	EN 50361:2001

This product is marked with in accordance with the Class II product requirements specified in the R&TTE Directive, 1999/5/EC. The equipment is intended for use throughout the European Community. PAN European Frequency Range: 2.402—2.480 GHz.

Restrictions in France are as follows:

•Indoor use: Maximum power (EIRP*) of 100 mW for the entire 2.400—2.4835 GHz

•Outdoor use: Maximum power (EIRP*) of 100 mW for the 2.400—2.454 GHz band and maximum power (EIRP*) of 10 mW for the 2.454—2.483 GHz band

For further information, please contact:

Honeywell Imaging & Mobility Europe BV

Nijverheidsweg 9

5627 BT Eindhoven

The Netherlands

1 - 1