Network Cards

The Connections tab (see Connections Tab on page 7-6)contains a Network Cards icon

that
displays the network cards installed in the terminal.

 

1. Tap Start > Settings > Connections > Network Cards

 

2.Tap on an adapter in the list to review its settings. (Server-assigned IP addresses use DHCP.)

3.If you make a change on one of these tabs, tap OK to confirm the changes.

4.You must perform a soft reset to update the registry entries; see Soft Reset (Warm Boot) on page 3- 15. During the soft reset, the new registry entries are created and can be read by the applications that need them.

! Do NOT perform a Hard Reset (Cold Boot) (see page 3-15)after modifying an adapter here. Hard resets return the terminal to factory defaults, which erases network adapter modifications made here.

7 - 12