Honeywell 7850 Beam, Start, Settings, Connections, Sending Data, IrDA Port Location, Verify Beam Settings, Receive all incoming beams…, Using Infrared Communication

Using Infrared Communication

The IrDA port sends and receives data between the terminal and other devices equipped with infrared. The maximum data transfer speed is 115 Kbps with a duty cycle of 18.75%.

IrDA Port Location

IrDA Port

Verify Beam Settings

By default, the IrDA port is enabled after each hard reset. This means that the IrDA port is ready to send and receive data via infrared. Tap Start > Settings > Connections tab > Beam.

Receive all incoming beams… must be checked for the terminal to receive infrared data from another device.

Sending Data

You can send and receive information via infrared, including software programs (.exe files).

To send or receive, the IrDA ports of both devices must be aligned with each other and within a close range. The maximum data-transfer speed is 115 Kbps.

1.Align the IrDA ports of both devices. (When sending data from one Dolphin terminal to another, posi- tion both terminals so that the IrDA ports are facing each other directly.)

2.Open the program where you created the item you want to send and locate the item in the list. You can beam files, but not folders, from File Explorer.

7 - 8