| Table of Contents |
|
Introduction | 4 | |
1 System Description | 7 | |
System Specifications | 8 | |
2.1 | Operating the Sensor | 8 |
2.2 Changing the Target Gas using | 9 | |
2.3 | Response Test | 10 |
2.4 | Sample Inlet Port | 10 |
2.5 | Response/Recovery Time | 10 |
2.6 | Interference Gases | 11 |
2.7 | Alarm Functions | 11 |
2.8 | Display Resolution | 11 |
3 Maintenance | 12 | |
3.1 | Periodic Maintenance | 12 |
3.2 | Sensor Life | 12 |
3.3 | Calibration | 12 |
| To Enter ZERO / SPAN Mode | 13 |
| Zero Calibration | 13 |
| Span Calibration | 13 |
| To Exit ZERO / SPAN Mode | 13 |
3.4 Troubleshooting | 13 | |
4 Programming and Advanced Features | 15 | |
4.1 | Alarm Setpoints, Functions | 15 |
| To Enter CAUT / WARN / ALRM Mode | 15 |
| Warning Setpoint | 15 |
| To Exit CAUT / WARN / ALRM Mode | 15 |
| To Enter CAUT / WARN / ALRM Mode | 15 |
| Warning Function | 16 |
| To Exit CAUT / WARN / ALRM Mode | 16 |
4.2 | Display Variables | 16 |
| To Enter AVG / BLANK Mode | 16 |
| AVG Variable | 17 |
| To Exit AVG / BLANK Mode | 17 |
4.3 Sample Mode | 17 | |
| Taking a sample | 17 |
| Programming sample mode variables | 17 |
| To Enter SAMP / MEAS / CLEAR Mode | 17 |
| SAMP Variable | 18 |
| To Exit SAMP / MEAS / CLEAR Mode | 18 |
4.4 | Data Logging | 18 |
| 18 | |
Honeywell | 5 |