Configuration

Figure 3-52 Alarm-In Actions 1 Setup Screen

Selecting a Camera for Recording

1.Highlight the desired field under the Record heading, and press . A list of cameras appears.

2.Select the cameras that you want the DVR to record when an associated alarm input is triggered.

Note For the Record action, the camera you select should be set to the Event or Time & Event recording mode in the Record Schedule setup screen.

Setting Alarm-Out Actions

1.Highlight the desired field under the Alarm-Outheading, and press . The Alarm-In 1: Alarm-Out screen appears.

2.Select the Alarm Output connectors that you would like to activate whenever the DVR detects an input on the associated alarm input.

3.Turn On or Off the internal buzzer of the DVR. When set to On, the internal buzzer beeps when an event occurs.

4.Select OK and press to load the Alarm-Out Actions settings.

Note For the Alarm-Out action, the alarm output and beep you select should be set to the Event mode in the Alarm-Out setup screen (Schedule tab).

78