Honeywell HRSD16 Setting an Automatic Alarm-InCheck, Checking for Bad Sectors on the Disk, Setting Up Automatic Storage Check-Up, Setting a Disk Almost Full Notification

Configuration

4.Select the Day field and press to change the day. A menu appears with choices from individual days from Sunday to Saturday, Monday-Friday,

Holidays, and All. Scroll to choose the setting, and press to select.

5.Select the Range field and press to change the time range. The Range uses a 24-hour clock, and adjusts in 15 minute increments.

6.Highlight the Interval field, and press to change the interval that you want the DVR to run self-diagnostics on recording. A list appears from which you can select 1 hr. to 30 days or Never.

7.Select to delete a schedule.

8.Select OK and press to save the changes.

Setting an Automatic Alarm-In Check

Select the Alarm-In port you want to check by highlighting the corresponding field in the Interval column and pressing . A list appears from which you can select 1 hr. to 30

days or Never.

Setting Up Automatic Storage Check-Up

Highlight the Storage tab. The System Event Storage screen displays.

Figure 3-73 Storage Screen

Checking for Bad Sectors on the Disk

1.Highlight the field beside Disk Bad Notify and press .

2.Select the percentage level of bad disk sectors at which you want the DVR to trigger an alert. Percentage levels range from 10% to 90%.

Setting a Disk Almost Full Notification

1.Highlight the field beside Disk Almost Full Notify and press .

2.Select the percentage level of disk usage at which you want the DVR to trigger an alert. Percentage levels range from 80% to 99%.

98