Configuration

Figure 3-71 Health Check Screen

Setting an Automatic System Self-Check Schedule

Using the UP and DOWN arrows, highlight the field beside System and press Select how often you want the DVR to self-check by selecting from the range of 1 hr. to 30 days or Never.

Setting an Automatic Recording Self-Check Schedule

1.Highlight Setup... beside Check Recording and press . The Check Recording screen appears.

Figure 3-72 Check Recording Screen

2.Highlight Schedule On and press to toggle the schedule On and Off. When set to On, the rest of the Check Recording screen becomes active.

3.Select + to add a setting to the Check Recording schedule. A new schedule appears in the table.

You can set the day, time range, and interval that you want the DVR to run self-diagnostics on the recorder. The Interval ranges from 1 min. to 7 days or Never.

Document 800-00918 Rev F

97

02/08