Configuration

Figure 3-60 Motion Detection Actions 1 Screen

Note You can associate multiple cameras with a camera that detects motion.

Selecting a Camera or Cameras for Recording

1.Highlight the desired field under the Record heading, and press . A list of cameras appears.

2.Select the cameras that you want the DVR to record when the DVR detects motion on the selected camera.

If the DVR detects motion on the selected camera, it starts recording video from all the associated cameras.

Note For the Record action, the camera you select should be set to the Event or Time & Event recording mode in the Record Schedule setup screen.

Setting Alarm-Out Actions

1.Highlight the desired field under the Alarm-Outheading, and press . A list of Alarm Outputs and the toggle for the Beep appears.

2.Select the Alarm Output connectors that you would like to activate whenever the DVR detects motion on the selected camera.

You can also set the DVR internal buzzer to sound if motion is detected on the selected camera.

Document 800-00918 Rev F

85

02/08