Parameter | Default | Function |
|
|
|
|
| How to handle antenna diversity when transmitting packets to the Access |
|
| Point. |
|
| Options are: |
|
| Main only (use the main antenna only) |
|
| Aux only (use the auxiliary antenna only) |
|
| On (use diversity or both antennas). |
|
| The options for the TX Diversity parameter should be set, based on the |
| BG: On | antenna configuration, as follows: |
TX Diversity |
| |
A: Main Only |
| |
|
| |
|
| Contact Technical Assistance if you have questions about the antenna(s) |
|
| installed on your HX2. |
|
|
|
|
| How to handle antenna diversity when receiving packets from the Access |
|
| Point. |
|
| Options are: |
|
| Main Only (use the main antenna only) |
|
| Aux Only (use the auxiliary antenna only) |
|
| |
|
| |
| BG: | The options for the RX Diversity parameter should be set, based on the |
RX Diversity | antenna configuration, as follows: | |
Main |
| |
| A: Main Only |
|
|
| Contact Technical Assistance if you have questions about the antenna(s) |
|
| installed on your HX2. |
|
|
|
|
| If the packet size (in bytes) exceeds the specified number of bytes set in the |
|
| fragment threshold, the packet is fragmented (sent as several pieces instead |
Frag Thresh | 2346 | of as one block). Use a low setting in areas where communication is poor or |
|
| where there is a great deal of wireless interference. |
|
| Options are: Any number between 256 bytes and 2346 bytes. |
|
|
|
|
| If the packet size exceeds the specified number of bytes set in the Request |
|
| to Send (RTS) threshold, an RTS is sent before sending the packet. A low |
RTS Thresh | 2347 | RTS threshold setting can be useful in areas where many client devices are |
|
| associating with the Access Point. |
|
| Options are: Any number between 0 and 2347. |
|
|
|
|
| The LED on the wireless card is not visible to the user when the wireless |
LED | Off | card is installed in a sealed mobile device. |
|
| Options are: On, Off. |
|
|
|