IPGSM-DPC Commercial Fire Communicator – Installation and Setup Guide

STEP 3 – Determine the Signal Strength and Select a Location

IMPORTANT - Do Not mount this device outdoors.

RF Exposure

Warning – The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in con- junction with any other antenna or transmitter.

When choosing a suitable mounting location, understand that signal strength is very important for proper operation. For most installations using the supplied antenna, mounting the unit as high as practical, and avoiding large metal components provides adequate signal strength for proper operation.

In this procedure, you will use the iGSM Communications Module to determine signal strength in order to find a suitable mounting location.

Note: Since the SIM is already activated, the RSSI signal strength indicators will indicate signal strength.

1.You will need a fully charged 12V battery.

2.Attach the Antenna (see illustration on page 6).

3.Temporarily wire the battery's negative [–] terminal to TB1–4 on the iGSM communications module, then wire the battery's plus [+] terminal to TB1–2 on the communications module. Wait about one minute for the module to initialize.

4.Position the assembly near a suitable mounting position and observe the RSSI display.

5. Look for a mounting position that yields at least 3 bars lit solid. Four

 

3 BARS MIN.

 

or five bars are better.

R Y Y G G G 7845i-GSM-025-V0

6.Verify the signal strength remains steady for a few minutes, then mark that mounting position. Disconnect the battery.

STEP 4 – Mount and Wire

∙For ULC compliant installations, refer to the topic on ULC Compliance in this manual.

∙For Dry/Indoor use only.

∙External cabinet wiring MUST be routed in conduit.

This communicator comes partially assembled with all the components mounted except the Antenna, LED Display board, and PowerBoost1. To protect certain components on the PowerBoost1, it is shipped un- mounted but fully wired.

Note: Refer to the diagram on page 6, and to the Wiring Diagram on the inside of the back cover of this manual for wiring and component identification.

1.Remove knockouts from cabinet to accommodate the power input wires, and wiring to the control panel. (DO NOT REMOVE the two knockouts directly above the PowerBoost1 module.) Then mount the cabinet securely to the wall using 4 screws or bolts. Use mounting screws or bolts that are suitable for the material being anchored to.

2.Ensure the cabinet door lock is installed.

3.Install the two plastic mounting rails for the LED Display board. They simply snap into the back plate holes.

–4 –

Page 5 Page 7
Page 6
Image 6
Honeywell IPGSM-DPC manual Determine the Signal Strength and Select a Location, Mount and Wire
Page 5 Page 7

IPGSM-DPC specifications

The Honeywell IPGSM-DPC is an advanced communication device designed for alarm systems, providing a reliable and robust connection to monitoring services. This dual-path communicator integrates both internet and cellular technologies, ensuring that security alarm signals are transmitted without interruption. Its ability to utilize both pathways enhances the reliability of the alarm signals, especially in situations where one mode of communication might fail.

One of the standout features of the IPGSM-DPC is its compatibility with Honeywell's Total Connect service, which allows users to remotely monitor and manage their security systems via a smartphone, tablet, or computer. This feature provides real-time alerts and updates, giving users peace of mind and control over their security environment. With Total Connect, users can also receive notifications for certain events like alarm triggers or system status changes.

The IPGSM-DPC is built with the latest in wireless communication technology. It operates on the LTE (Long-Term Evolution) network, which ensures fast data transmission speeds and a wider coverage area. Additionally, the device supports multiple communication formats, making it flexible and adaptable to various alarm panel configurations. This versatility allows for easy integration into existing security systems without the need for extensive rewiring or hardware replacements.

Moreover, the Honeywell IPGSM-DPC features a built-in backup battery, ensuring continued operation even in the event of a power outage. This added layer of security is crucial for maintaining protection during emergencies. The device is designed with user-friendly installation in mind, allowing both professionals and DIY users to set it up quickly and efficiently.

Another notable characteristic is its robust encryption methods, which protect data during transmission. This ensures that sensitive information related to security alarms remains secure from potential cyber threats. The IPGSM-DPC is also equipped with diagnostic features, allowing users to monitor the health and performance of their communication paths, helping to preemptively address any connectivity issues.

In summary, the Honeywell IPGSM-DPC is a state-of-the-art dual-path communicator that enhances the reliability and security of alarm systems. With its integration capabilities, robust cellular technology, user-friendly installation process, and advanced security features, it stands out as an essential component for modern security solutions. Whether used in residential or commercial applications, it offers peace of mind and advanced control over alarm systems.
Top Page Image Contents