Step 2. Charge the Main and Backup Batteries

The power supply for Dolphin terminals consists of two types of battery power: the main battery pack that is accessible from the back panel, and the backup battery that resides inside the terminal.

The main battery powers the terminal. The internal backup battery charges off the main battery and maintains the application data stored in RAM memory for up to 30 minutes when the terminal’s main battery pack is completely discharged or removed.

Before Initial Use

Terminals are shipped with both batteries discharged of all power. The initial charging time for the main battery pack is 4 hours and 8 hours for the internal backup battery. Connect the terminal to one of the 9700 series charging peripherals to charge; see Peripherals for the 9700 on page 3-2.

Dolphin 9700 terminals are designed for use with the following 9700 charging devices and cables: 9700- CB, 9700-EHB, 9700-HB, 9700-MB, 9700-NB, 9700-MC, 9700-RS232, 9700-USB.

!Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-

Charging Using the Communication Cable (9700-RS232 or 9700-USB)

Use only UL Listed power supply, which has been qualified by Honeywell with output rated at 9.5VDC

and 1.7 amps with the device.

!terminals/batteries with peripheral devices. Mating wetcomponents may cause damage not covered by the warranty.

1.Connect the USB or RS232 cable to the I/O connector on the terminal.

2.Tighten the thumb screws on the cable cup to secure the cable to the terminal.

3.Plug the power cord into the power adapter.4.Plug the power adapter cable into the power connector on COMM cable.5.Plug the COMM cable into the appropriate port on the host device.6.Plug the power cord into a standard wall outlet.7.The LED on the front of the terminal flashes

and illuminates as the terminal starts to initialize the boot process.Ensure all components are dry prior to mating

Power Adapter

Cable

Power

Cord

Host Device

COMM Cable

USB

Connector Or

RS232 Connector

2 - 2