Honeywell Model 9700-HB + ENT, Power, see page, or SCAN key, Suspend Mode, Hardware Maintenance, Resetting the Terminal, Soft Reset (Warm Boot), Hard Reset (Cold Boot)

Resetting the TerminalThere are two types of system resets: a soft and a hard reset.Soft Reset (Warm Boot)

A soft reset re-boots the device without losing RAM data. You would perform a soft reset when

•the terminal fails to respond.•after installing some software applications.•after making changes to certain system settings, such as network cards.

1. Press and hold the RED	TAB
	+ TAB ® keys for approximately 5 seconds.

2.The decode and scan LEDs flash for approximately three seconds as the terminal resets.

3.When the reset is complete, the Today screen displays.Hard Reset (Cold Boot)

A hard reset resets the operating system, restores the terminal back to factory defaults, and resets the terminal after a bootloader, keyboard, and kernel upgrade.

!A hard reset erases all of the data stored in RAM memory and all RAM installed applications!

1. Press and hold the RED	+ ENT	ENT
		keys for approximately 5 seconds.

2.The decode and scan LEDs light for approximately 3 seconds.3.The terminal re-initializes; see Initialize the Mobile Computer on page 2-8.Suspend Mode

The terminal goes into Suspend Mode automatically when the terminal is inactive for a programmed period of time. You can program this time on the Advance tab of the Power System Setting; see Power on page 7-14.

To put the terminal into Suspend Mode manually, press the Power key and the screen goes blank.

To wake the terminal from Suspend Mode, press the Power key or SCAN key SCAN .

Hardware Maintenance

When needed, clean the image engine window and the LCD display with a clean, non-abrasive, lint-free cloth. The terminal can be cleaned with a damp cloth.

For additional information on hardware maintenance specific to the Dolphin Healthcare Housings, see page 3-11.

3 - 15