Honeywell Model 9700-HB File, Explore, connect to COM1, Connection Settings, Allow USB connections, For RS232 communication, For USB communication, check

Setting Up the Host Workstation

Verify that ActiveSync is configured to use the appropriate communication type by clicking File > Connection Settings.

For USB communication, check	For RS232 communication,
Allow USB connections.	connect to COM1.

Note: You can have both USB and RS232 selected in the software without affecting processing. However, your hardware setup should use only RS232 or USB, not both.

Communicating with the Dolphin Terminal

After setting up both the workstation and the terminal, ActiveSync connection should be automatic.

1.Connect the Dolphin terminal to a Dolphin communication peripheral.

2.The Dolphin terminal automatically opens ActiveSync to establish a connection.

Synchronizing with the Host Workstation

After setup, synchronization begins automatically whenever the terminal’s mechanical connector connects to a Dolphin peripheral that is connected to a host workstation with ActiveSync installed.

Exploring the Terminal from the Workstation

When the Dolphin terminal and workstation are connected, open the main ActiveSync window (on the desktop), and click Explore.

The Mobile Device folder opens in Windows Explorer.

The Dolphin terminal is now treated as a mass storage device, and transferring files is as simple as dragging and dropping or copying and pasting.

8 - 9