19
19
NOTE: The Weather Forecaster project s only Channel 1 (one) remot e
temperature
· Press FLIP button to rotate projec ted image 180° clockwise
· Press and hold FLIP button for 2 sec onds to change temperature
information from remote to indoor
· Press and hold FLIP button for 2 sec onds again and the
projected image will alternate betw een the remote and indoor
temperature every 5 seconds.
NOTE: During initial product setup ( remote sensor and atomic time
signal search) there will be no remot e temperature projected.
CONTINUOUS TIME AND TEMPERATURE PROJEC TION
· Connect AC/DC adapter provided with the pr oduct to project the
time and temperature image continuous ly.
20
· Slide the CONTINUE PROJECTION switch to the arrow direction
shown on the main unit’s side: the cur rent time and temperature
will be projected on the wall or the ceiling.
LIGHT SENSOR The Weather Forecaster is equipped w ith the light sensor which detec ts
the environmental light conditions . At the light conditions lower than 100
LUX, the LCD will light up automatically if AC adapter is connected. The
backlight can be set using the LIGH T SENSOR switch modes:
AUTO – automatic LCD backlight
ON – continuous LCD backlight
OFF-- turns off LCD backlight
This product is engineered to giv e you years of satisfactory service if
handled carefully. Here are a few precautions:
· Do not immerse the unit in water.
· Do not clean the unit with abras ive or corrosive materials. They