15
15
search for the atomic time signal. It us ually takes between 5-8 minutes .
NOTE: Do not press any buttons on t he main unit during auto search
as it may interrupt products operat ion, and you will need to start set
up procedure again.
Once the atomic time signal is rec eived, the date and time will be set
automatically, and the [ ] icon will appear.
NOTE: It is necessary to set your Time Z one, having in mind that the
default zone is a Pacific Standard Ti me (PST). (Refer to MANUAL
SETTINGS section)
If the time signal has not been rec eived in 8 minutes, you may use the
MODE button to set the time and date manually . (Refer to the MANU AL
SETTINGS section).
After the clock is set manually, plac e the Weather Forecaster by the
window for the better reception. The atomic clock receiver is programmed
that it will continue to search for the atomic time signal daily for every
hour between 1:00 am and 4:30 am.
Once the time signal has been s uccessfully received, the time and date
will be updated automatically.
CLOCK AND CALEND AR DISPLAY WINDOW
The Weather Forecaster with Dual Pr ojection displays current time in two
display modes in hour-minutes- seconds and in hour-minutes-day
The date is displayed in month-date for mat below the current time with
the day of the week and US map.
MANUAL SETTINGS
It is necessary to set the desired TIME ZONE.
TIME ZONE
16
· Press MODE button so that the Day of the Week abbreviation is
displayed to the right of the time; for ex ample: pm 2:37tu
· Select the Time Zone by pressing and holding the “▲” or UP
button for 3 seconds.
· Keep holding “▲” or UP button until the des ired US Time Zone
(Pacific, Mountain, Central or Eas tern) is highlighted on the
displays US map, located to the right of the time display and
above the day of the week.
· Release the “▲” or UP button. The Time Zone is set.
CLOCK
· Press and hold MODE button for 3 s econds: the year will flash.
Press UP () or DOWN () to change flas hing digits.
· After the year is set, press MODE button again to confirm and
move to the next parameter.
· Continue setting month, date, hour , minutes, language for the
day of the week and temperature in Fahr enheit or Celsius.
· Press MODE for the last time to retur n to the time of day with
seconds, after the last parameter is set.
CLOCK ALARMS
The Weather Forecaster with Dual Pr ojection has two time alarms
Weekday alarm (W) and Single day alarm(S) - and one Ice Warning
Alarm (PRE-AL).
· If Weekday alarm is activated, it will s ound at the set time and
the alarm icon will flash Monday s through Fridays.
· If Single day alarm is activated, it w ill sound at the set time and
the alarm icon will flash only for this specific day and will not
activate on subsequent days.
· If Ice Warning Alarm is activated, in w ill sound at the set time