7
7
REMOTE SENSOR FEATURES
· Transmits remote temperature to the main unit via radio signal
· 100 feet (30 meters) transmission r ange without interference
· LCD display of measured temper ature
· Selects one of three transmiss ion (3) channels
· Selects temperature display in either Celsius or Fahrenheit
· Case can be wall mounted using built -in hanger
A. LED INDICATOR
· Flashes once when transmitting a r eading to the main unit.
· Flashes twice when battery pow er is low.
B. BATTERY COMPARTMENT
Holds two AA-size batteries
C. RESET
Resets all readings
D. CHANNEL switch
8
Selects the desired transmission c hannel
E. WALL-MOUNT RECESSED OPEN ING
Keeps the remote sensor on the w all
F. °C/ °F selector
Selects the temperature display in C elsius or Fahrenheit
· We recommend using alkaline batter ies for the remote sensor
and main unit when temperatures are above 32°F (0°C). We
recommend using lithium batteries for the remote sensor when
temperatures are below 32°F ( 0°C).
· Avoid using rechargeable batteries . (Rechargeable batteries
cannot maintain correct power r equirements).
�� ALWAYS install batteries in the remote sensor before the main
unit.
· Insert batteries matching the polar ity in the battery compartment
· Press RESET after each battery change with a paper clip or wire.
· Remove protective plastic screen fr om LCD display (if any).
· During an initial setup, place the main unit c lose to the remote
sensor.
· After reception is established (the r emote temperature will appear
on the main unit’s display), position the r emote sensor and the
main unit within the effective transmis sion range of 100 feet (30
meters).
· The remote sensor can be placed indoors or outdoors,
depending on the area where the t emperature is intended to
be measured. If you intend meas uring outdoor temperature,
place temperature sensor outdoor s
· The main unit must be placed indoor s.