17
17
and alarm icon will flash once the remote temperature for
Channel One (1) will reach 32°F( 0°C) and below.
NOTE: Ice Warning Alarm can be set only if one or both - Weekday
or Single alarm are programmed.
SETTING THE WEEKDAY (W) AND SINGLE DAY(S) ALARM S
· Press ALARM ON/OFF button onc e to enter into the alarms
setting mode. The default alarm is a Week day alarm (W). The
abbreviation “OFF” with a letter “W” next to it w ill be displayed, if
the alarm has not been set prev iously.
· Press and hold ALARM ON/OFF button for two seconds. The
hour digit will flash.
· Enter the hour using UP (▲) or DOWN (▼).
· Press ALARM ON/OFF again. The minute digits will flash.
· Enter the minutes using UP (▲) or D OWN (▼).
· Press ALARM ON/OFF button again to c onfirm and the weekday
alarm time will be set.
· Set Single day alarm if desired in the s ame manner.
SETTING THE ICE WARNING ALARM (PRE-AL)
If Weekday or Single day alar m is set, the Ice Warning Alarm can be
programmed.
· Press ALARM ON/OFF button onc e to enter into the Ice Warning
Alarm setting mode. The abbrev iation “OFF” with a “PRE-AL”
next to it will be displayed.
· Press and hold ALARM ON/OFF button for two seconds. The
“30” number will flash, meaning that if s elected, the alarm will
sound 30 minutes earlier than the Week day or Single alarm.
· Select the desired Ice Warning Alar m interval in 15 minutes
18
increments between 15 and 90 minutes , using UP (▲) or DOWN
(▼)buttons
· Press ALARM ON/OFF button again to c onfirm and exit from the
alarm setting mode.
ACTIVATING THE ALARM
· Press ALARM ON/OFF button to enter into the alarms mode.
· Press UP (▲) to activate or DOWN (▼) to deactivate desired
· If alarms are activated, the corr esponding icons W, S or PRE-AL
will be displayed.
SNOOZE
When any alarm sounds, press the SNOOZE/LIGHT button to temporar ily
stop the alarm. The alarm sound w ill resume in five minutes. If the alar m
is not disabled after that, it will sound for four more minutes and then w ill
stop by itself.
PROJECTION
The Weather Forecaster is capable of pr ojecting images for a short per iod,
as well as continuously. This require both batter ies and power adapter.
TIME AND REMOTE TEMPERATURE PROJEC TION
· Press SNOOZE/LIGHT button onc e to project the current time
and the remote temperature image for five seconds.