Figure 4 | Manifold/Orifice Measurement |
|
|
Measure 13/16″ from face of orifice to back edge of manifold pipe.
Changing Pilot Burner Orifice
(Required for Converting from Propane Gas to Natural Gas) (All models except PGF3, PGX3, and PDX3).
1.Disconnect the pilot supply line from the pilot burner.
2.Remove pilot orifice from pilot burner. Replace with natural gas orifice stamped which is provided in kits (Figure 5)
3.. Reconnect the pilot tubing securely to the pilot burner.
4.Verify proper relationship of pilot burner assembly per fig- ure 6, prior to completing the conversion.
Figure 5 | Changing Pilot Orifice |
Figure 6 | Burner Pilot Assembly |
|
|
|
|
Gas Valve Conversion (Required for Converting from Propane Gas to Natural Gas)
Conversion of Honeywell VR8200, SV9500, SV9501 and VR8204M Gas Valves using Natural Gas Conversion Kit # 396222.
1.Remove the regulator cap screw and pressure regulator ad- justing screw. (See Figure 10)
2.Remove the existing regulator spring from the regulator housing.
3.Insert the replacement spring (stainless steel) contained in this kit into regulator housing.
Pilot |
Orifice |
Figure 7
Inlet Pressure Tap (Hidden)
INLET
Typical Gas Valve Honeywell
SV9500
|
| OFF |
| ON | Honeywell | Wiring | |||
|
|
|
| Terminals | |||||
WARNING |
| IGNITER |
|
| |||||
ExplosionSeriouscan |
|
|
|
|
|
|
| ||
resultinjory.Hazard. |
|
|
|
| |||||
Read |
|
| or |
| death |
|
|
| |
operating |
|
|
|
|
|
| |||
Neverinstructions |
|
|
|
|
| ||||
|
| valve. | before |
|
|
| |||
operateuse tools |
|
|
| Pilot | |||||
qualifiedthe |
|
|
| Do |
|
|
| ||
disassemble | valve.not |
| CONTROL |
| |||||
valve. | to |
|
|
|
| ||||
| service |
| call |
|
|
| |||
functionappliance |
|
|
| Outlet | |||||
|
|
|
|
|
| not |
|
| |
| properly.technician |
|
|
| |||||
|
|
|
| does |
|
|
|
| |
Pilot Adjustment
OUTLET
Outlet Pressure Tap
Connect manometer here to25-50-06check outlet pressure. Must be
adjusted per Table 1.
| 462 06 1211 00 |
3/17/06 |
