Manuals
/
Honeywell
/
Household Appliance
/
Smoke Alarm
Honeywell
Smoke Alarm 10 of, At the menu options screen, shown below, select C Quick Install
Models:
Smoke Alarm
1
10
15
15
Download
15 pages
48.03 Kb
7
8
9
10
11
12
13
14
<
>
Install
Returning the IPDACT to factory default settings
Set Port Settings to Bits per second Data bits Parity none Stop bits
Checklist
Mount the IPDACT onto the IPBRKT using the plastic standoffs that came with the IPBRKT. Screw the standoff through the holes on the IPDACT into the metal mating threaded standoffs on the IPBRKT. Note, discard any double sided tape plastic standoffs that may be included with the IPDACT and use the supplied machine screw versions
Page 10
Image 10
•
At the menu options screen, shown below, select "
C: Quick Install
"
5/19/2008
10 of 15
Page 9
Page 11
Page 10
Image 10
Page 9
Page 11
Contents
Installation Instructions for use with HyperTerminal and serial port
Application Note Fire-Lite IPDACT Setup for Installing Dealers
Parts List
Part Numbers
Checklist of required programming information from Central Station
1. Using Common Enclosure Connect the IPDACT to the fire panel
2. Mount the IPDACT onto the IPBRKT using the plastic standoffs that came with the IPBRKT. Screw the standoff through the holes on the IPDACT into the metal mating threaded standoffs on the IPBRKT. Note, discard any double sided tape plastic standoffs that may be included with the IPDACT and use the supplied machine screw versions
Connect serial cable here CN1
2. Installation using IPENC or HP300ULX
Mount the IPENC next to the FACP as shown in the drawing below
4. Wire the IPDACT as described in the Product Installation Document
2. Short jumper P2 on the IPDACT using the supplied jumper
Programming Instructions Using HyperTerminal
Returning the IPDACT to factory default settings
Run HyperTerminal
8 of
Set Connect using to COM1 then OK
5/19/2008
Press Enter and the word password should appear as shown below
9 of
Set Port Settings to Bits per second Data bits Parity none Stop bits
Key-in default IPDACT password 24680 as shown above then press Enter
At the menu options screen, shown below, select C Quick Install
10 of
5/19/2008
Quick Install
i Select i Register MIP
DHCP Theory of Operation
The IP settings in the IPDACT work like this
Option “g IP Connectivity” displays the IP settings that are running in the device
