Note: All of the above available at
The IDPACT requires 24VDC filtered regulated power and a phone pair from the DACT of the fire alarm control panel.
While not required, it is highly recommended that any customer shared equipment used to connect the IPDACT to the Internet such as router or hub be supplied with backup power from a small UPS. This will provide IP connectivity and reduce central station nuisance alarms if AC power is lost.
Checklist of required programming information from Central Station:
1.IPDACT default access password (factory default is 24680).
2.Installer password, required to execute the register command.
3.If STATIC IP is to be used such as in an enterprise or corporation: Obtain IP address, subnet mask and gateway for IPDACT from enterprise IT manager. Default IP is 192.168.0 100 with subnet of 255.255.255.0
4.IPDACT account number or client number
5.IP addresses and of the Primary and Secondary VisorALARM central station receivers
6.UDP Port number to use
Mounting Options: Note: a detailed PID (Product Installation Document) is included with the IPBRKT and IPENC.
1.Using Common Enclosure Connect the IPDACT to the fire panel
1.Using the instructions found in the IPBRKT kit, install the metal IP Bracket into the right slots of the common enclosure cabinet.
5/19/2008 | 2 of 15 |
