dates.
Accessing Sunrise/Sunset Mode
From the main unit: Press UP or DOWN until the sunrise and sunset icons 
on the lower left of the display will start flashing.
From the remote control: Press
.
Programming the Location Data
•In Sunrise/Sunset Mode, press and hold SET to enter the location programming mode until the city code in the Time and Alarm display will flash.
•Select the city code closest to your area by pressing the UP or DOWN. Refer to P.40 for a list of available codes. The corresponding longitude and latitude will be displayed in Sunrise/Sunset window along with the city code.
•If you wish to enter the geographical coordinates yourself, select the “USR” as the city code.
•Press SET to confirm your selection and enter into the geographical coordinates
programming mode
Set Degree of Latitude
•Press UP or DOWN to adjust the digits. Press and hold either button for fast advance.
•Press SET to confirm your selection.
•Repeat above procedure to set latitude and longitude minutes, longitude degrees, time zone, and DST selection.
•Once programming is completed, the display will return to the Sunrise/Sunset Mode.
Note: Press and hold SET anytime during the setup to return to normal Clock and Alarm Mode. All settings will be cancelled.
Viewing the Location Data
In Sunrise/Sunset Mode press SET button to select between the time and sunrise/ sunset times mode display, calendar and sunrise/ sunset times display and a calendar and longitude/ latitude display.
Viewing Sunrise/Sunset Times for Different Dates
•In Sunrise/Sunset Mode, press the MEMORY button until the date will flash.
•Press UP or DOWN to adjust the date. Press and hold either button for fast digits advance.
31
