Manuals / Honeywell / Lawn and Garden / Weather Radio

Honeywell TE923W user manual Installation, Mounting hardware, PC connection cable

Models: TE923W

1 46

Download 46 pages 6.67 Kb

Page 5

	4 screws for securing rain gauge to the flat
	surface;	Mounting hardware
	4 screws for securing anemometer to vertical	Mounting hardware
	4 screws for securing anemometer to vertical
	surface
	2m (6ft) USB cable	PC connection cable

Installation

The Honeywell Professional Weather Station TE923W operates at 433MHz radio frequency, so no wire installation is required between the main unit (receiver) and the remote weather sensors (transmitters).

The remote weather sensors include a thermo-hygrometer (temperature and humidity) sensor, UV (ultraviolet) sensor, anemometer (wind sensor) and a rain gauge (rain sensor). All data measured by these remote sensors is transmitted to the main unit wirelessly, with the operating range up to 328 feet (100 meters) in the open area.

Remote UV sensor, anemometer and a rain gauge must be placed outdoors to measure weather elements.

Remote thermo-hygrometers can be placed indoors or outdoors, depending on the area where the temperature and humidity are intended to be measured. If you intend measuring outdoor temperature and humidity, place the remote sensor outdoors.

Note: It is critical to assemble and power up all of the remote weather sensors BEFORE setting up the main unit.

Note: It is critical to power up and test communication between all of the weather sensors and the main unit BEFORE permanently mounting them outside.

5

Image 5

Honeywell TE923W user manual Installation, Mounting hardware, PC connection cable

Contents

USER MANUAL HONEYWELL PROFESSIONAL WEATHER STATION WITH REMOTE CONTROL TE923WStandard Package Contents Table of ContentsInstallation Battery installationIntroduction Remote Control Standard Package ContentsAC/DC 7.5V power adaptor PicturePC connection cable InstallationMounting hardware Before you begin A. LED INDICATOR FEATURESB. BATTERY COMPARTMENT SCREW Holds battery compartment door in place F. BATTERY COMPARTMENT Holds two AA-size batteriesPlacement tips AssemblyMounting GroundA. LED INDICATOR FEATURESB. BATTERY COMPARTMENT D. CHANNEL SWITCHThe remote thermo-hygrometer sensor can be placed on the flat surface or mounted on the wall in vertical position Placement tipsBA C Rain GaugeG D EH F I FEATURESPlacement tips MountingBattery installation A BD C Anemometer wind sensorE G FH A. WIND VANEH. BATTERY COVER F. BATTERY COMPARTMENTE. WIND CUPS SHAFT G. WALL MOUNT SCREW OPENINGSMain Unit PowerTime WeatherPlacement tips OperationBattery installation A. UP Main unit and handheld remote control adequate buttonsB. DOWN C. SETHandheld remote control only F ALARM/CHARTTemperature and Humidity ModeWeather Forecast Mode Recalls the Pressure and Weather Forecast ModeRecalls the Rain Mode Recalls the Clock and Alarm ModeUV Window Displays Clock and Alarms Window DisplaysSunrise/Sunset Window Remote UV sensor battery statusRain Window Displays Temperature and Humidity Window DisplaysDisplays Wind Window Displays Customizing your Weather StationIt is required to program OptionalAccessing Pressure and Weather Forecast Mode Using Different Weather ModesSetting Pressure Parameters during initial setup Connecting the Weather Station to a PCSetting the Pressure and Altitude Unit Sea Level Pressure SettingViewing the Pressure and Altitude Information Viewing the Sea Level Pressure HistoryViewing the Moon Phase History and Weather Forecast Viewing the Pressure, Temperature and Humidity Bar ChartsThe Weather Forecast Display Understanding Weather ForecastAccessing UV Mode Understanding the Moon Phase Diagram UV ModeResetting the UV Statistics Memory Setting Units for UV Display MED/h or UVISetting the time, date and language Clock and Alarm Mode Manual SettingsAccessing Clock and Alarm Mode Different Clock and Calendar Displays Enabling or Disabling the Time AlarmsProgramming Time Alarms Disabling or Enabling Snooze function To disable alarmsAtomic Time Reception WWVB RADIO CONTROLLED TIMEAtomic Time Reception Strength IconSunrise/Sunset Mode for better receptionProgramming the Location Data Accessing Sunrise/Sunset ModeSet Degree of Latitude Viewing the Location DataUnderstanding of the Sunrise/Sunset Display Accessing Temperature and Humidity ModeSunrise status Sunset statusRecalling of Temperature and Dew Point Displays Viewing Temperature and Humidity for each ChannelSet the Temperature in Celsius or Fahrenheit Activating/Deactivating the Temperature AlertsViewing the Max/Min Channel Temperature and Humidity Disabling Temperature AlarmsResetting the Remote Temperature and Humidity Memory All Remote Sensor Signals Search ActivationSetting Units for the Rain Display in inches or mm Resetting the Rainfall Statistics MemorySetting up the Daily Rainfall Alert Viewing Rain StatisticsConfiguring Wind Display Accessing Wind ModeSetting Units for the Wind Speed in km/h, mph, m/s or knots Resetting the Wind Statistics MemoryCleaning MaintenanceDisabling the Wind Alert Changing BatteriesQ “The weather forecast is inaccurate.” Q “The display shows dashes “---” for weather parameters”Clean small holes and parts with Q-tips or pipe-cleaner TroubleshootingPRECAUTIONS US and Canadian Cities Appendix - City CodesCity CodeCity World CitiesCity CodeDST Daylight Savings Time definitions SpecificationsRadio Frequency 433 MHz Barometric PressureTemperature remote Temperature IndoorHumidity Indoor Humidity OutdoorWeight without batteries Battery life alkalineDimensions RainfallDECLARATION OF CONFORMITY FCC STATEMENTSTANDARD WARRANTY INFORMATION