SIM card installation

Read through these installation instructions before commencing assembly.

Connect the supply cable only when everything else has been assembled.

This document describes the process of inserting a SIM card into the PCCard of your Thor VX8 computer.

Requirements

In order to perform this operation you need the following:

•Torx 20 screwdriver.

•SIM card from your network operator.

Installation

The following procedure describes how to insert a SIM card:

1.Place the Thor VX8 upside down onto a flat clean surface.

2.Remove the service hatch by loosening the 2 torx screws.

3.Remove the antenna pigtail from the GPRS/EDGE/3G PCCard.

4.Remove the GPRS/EDGE/3G PCCard by pressing the PCCard eject button.

4-97