Hardware Problems
This section lists possible solutions to some common problems with hardware.
Power Source
The Thor VX8 receives power from either an
ATTENTION
Using the wrong AC adapter or DC converter could damage the Thor VX8. Honeywell assumes no liability for damage to the Thor VX8 or adapter/converter caused by using the wrong adapter/converter.
The following table provides solutions to common power source problems:
SolutionMake sure you’ve attached the power cord properly and that you have the power switch in the On position.
Make sure the wall outlet (for
Check all inline fuses and replace if blown.
Make sure the vehicle battery is connected properly to the Thor VX8 power cable.
Contact your representative if you cannot find the source of the problem.
Keyboard
The following table provides solution to common keyboard problems:
Problem | Solution | |
|
| |
No characters generated on keypress. | Verify that all keyboard cables are securely attached and that any | |
set screws on the cable/adapter are tightened. | ||
| ||
|
| |
Get an unexpected character or function when pressing | Reboot the machine to return to its original setting. If the problem | |
some keys. | continues refer to the key map for correct key combinations. | |
|
| |
The 2nd key on the keyboard remains active and does | Press the SP key or an arrow key to release the 2nd state. Contact | |
your representative if the problem continues. | ||
not toggle on and off when another key is pressed. | ||
The | ||
| ||
The keyboard locked and you cannot use Ctrl + Alt + | Press and hold the power button to shutdown then press again to | |
Del to reboot. | restart the computer. | |
|
|