To access UV mode from the main unit press UP or DOWN until the UV icon 
on the display will flash. From the handheld remote control: Press
.
Viewing UV Statistics
In UV Mode press the MEMORY button viewing either current UV intensity, daily Maximum UV intensity with “DAILY MAX” displayed or weekly Maximum UV intensity with a “WEEKLY MAX” displayed.
Resetting the UV Statistics Memory
In UV Mode, press and hold MEMORY button to reset all UV statistics.
Setting Units for UV Display (MED/h or UVI)
In UV Mode, press and hold SET to convert units between MED/h and UVI.
Maintenance
Changing Batteries
The battery status of the remote UV sensor is checked every hour by the main unit. If the low battery indicator in the display section for UV data lights up, replace the batteries in the remote UV sensor.
When the batteries are properly installed, the remote UV sensor will resume sending signals to the main unit.
To enforce an immediate remote signals search, press and hold DOWN button on the main unit.
Cleaning
The outer casing of the remote UV sensor can be cleaned with a damp cloth. Small parts can be cleaned with a cotton tip or
Never use any abrasive cleaning agents and solvents. Do not immerse units with electronic parts in water or under running water.
7
