Honeywell WT6500 owner manual Turbine Over-Current Protection, Shock or Fire Hazard

Turbine Installation 20

Figure 2.11 Turbine Connection Location in SMARTBOX™ Controller

Turbine Over-Current Protection

The NEC/CEC requires the turbine circuit to be protected with a device rated for 125% of the rating of the circuit. The DC-rated fuse or circuit breaker between the turbine and the SMARTBOX™ Controller must have a maximum size of 15 (the maximum current rating of the Smart Box).

SHOCK OR FIRE HAZARD

Over-current protection must be installed to protect the Smart Box from short circuits and to provide a means of disconnecting the it.

REVERSE POLARITY DAMAGE

Before making the final DC connection or closing the DC breaker or disconnect, check cable polarity at both the battery and the Smart Box. Positive (+) must be connected to positive (+). Negative(-) must be connected to negative (-).

HONEYWELL™ Wind Turbine WT6500 Owner’s Manual - Rev 10