Hoover U5361950 owner manual Attach hose, Position tools, 1-10, D C E, 1-11, 1-12 C, 1-13

1-5

Place nuts in recessed areas on front of handle. Hold each nut in place while tightening each bolt securely with a Phillips screw driver.

1-6

Place bottom of cup into cleaner. Pivot cup and snap in place.

1-7

Position cord on back of cleaner as shown and press cord into clip.

Attach hose

1-8

Note: Hose must be connected as shown for all operations.

A

B

Align end of hose with projections

(A) over slots (B) in dirt duct.

1-9

B

Slide hose into duct (B) and twist hose to lock it into place.

1-10

D

C

E

Lift hose tube cover (C).

Position hose over hose hook (D) and into hose tube (E).

Position tools

1-11

1-12 C

B

A

1-13

D

Place smaller unridged end of wand into bottom of rack. Snap wand into clip. Repeat with other wand.

Snap ends of dusting brush (A), crevice tool (B) and furniture nozzle

(C) into clips as shown.

The crevice wand is packed inside one of the extension wands. Place it inside a wand for storage on the cleaner as well.

4