40005995Eng.qxd 24/07/2009 12:19 Page 18
Cancelling and resetting the programme
To cancel a programme press the 
button for 3 seconds. The DRY light will flash to indicate that it has been reset.
Start Delay
The Delay Start Function | allows the user to delay the start of the drying |
cycle by 3, 6 or 9 hours. |
|
When the function is first selected the display will show a delay of 3 hours, subsequent presses of the button will increase the delay to 6 or 9 hours.
To commence the programme press and the appliance will complete the drying cycle at the end of this time. The 3, 6 or 9 hour indicator light will flash to indicate that the start delay is in progress.
Cleaning and Routine Maintenance
IMPORTANT
Always switch off and remove the plug from the electricity supply before
cleaning this
appliance.
For electrical data
refer to the
rating label on the front of the dryer cabinet (with the door open).
Cleaning the dryer
●Clean the filter and empty the water container after every drying cycle.
●Regularly clean the condenser.
●After each period of use, wipe the inside of the drum and leave the door open for a while to allow circulation of air to dry it.
●Wipe the outside of the machine and the door with a soft cloth.
●DO NOT use abrasive pads or cleaning agents.
●To prevent the door sticking or the build up of fluff periodically clean the inner door and gasket with a damp cloth.
Technical specifications
Drum capacity | 115 litres |
Maximum load | 8 kg |
Height | 85cm |
Width | 60cm |
Depth | 60cm |
Energy Label Band | C |
18
